Inauguration of TANCAM Spoke Centre at Hindustan Institute of Technology & Science (HITS)

We are delighted to announce the inauguration of the TANCAM Spoke Centre at Hindustan Institute of Technology & Science (HITS) on 20th September 2025.

The centre was inaugurated by Thiru. Sandeep Nanduri, IAS, Managing Director, Tamil Nadu Industrial Development Corporation (TIDCO). His visionary leadership has been instrumental in strengthening Tamil Nadu’s industrial and innovation ecosystem. His continued support and guidance enable initiatives like TANCAM to bridge academia, industry, startups, and government.

Hackathon for the students from the University of East London

We recently had the privilege of hosting a Hackathon for the talented students from the University of East London, as directed by Guidance Tamil Nadu. The event, held on 13/06/2024 at TIDEL PARK, Chennai, was a remarkable collaboration between TANCAM and Guidance Tamil Nadu. 

3DEXPERIENCE Modeling & Simulation Conference 2024 India

UNLEASHING ACCELERATED & SUSTAINABLE INNOVATIONS WITH MODSIM

Engineering Excellence - Building a Sustainable Future

Defence Product Development for MSMEs in Coimbatore

An Awareness Session on Defence Product Development for MSMEs in Coimbatore is scheduled on 30th June 2023 from 3.30 PM to 6.30 PM in Kumaraguru College of Technology, Coimbatore. The program is jointly organized by the Kumaraguru Centre for Industrial Research and Innovation (KC.IRI), the COSIEMA CBE, Coimbatore SIDCO Industrial Estate Manufacturer's Welfare Association and the Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM.

OLIR - Startup Conclave

Olir, a one-day startup meet, organised by StartupTN and TIDCO on April 13, 2023 enabled 250 startups from the state to explore ways to accelerate the commercialisation of their product ideas. The event included a tour of Tamil Nadu Center of Excellence for Advanced Manufacturing (TANCAM), a multi-sector Centre of Excellence, located at the TIDEL Park in Chennai.

Conclave on 'Design - The Future of Engineering

Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM Sona College ofTechnology thrilled to have organized the Design Conclave on 17 March, 2023, bringing together some of the brightest minds in the design industry to discuss the latest trends, technologies, and insights.

Technical conclave on "Evolution, Intelligence and Advancement in manufacturing"

COSIEMA Coimbatore, in association with Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM , had organized a technical conclave, in COSIEMA Hall, SIDCO, Coimbatore on 14-02-2023 (Tuesday). More than 200 participants were present from various domains including MSME's, Students and Faculty members across the Engineering and Polytechnic Colleges in Coimbatore.

Industry 4.0 for MSMEs

A Seminar titled “Industry 4.0 for MSMEs” was conducted jointly by the FaMe TN and Indo-American Chamber of Commerce, India The seminar, organised on January 11, 2023, is a part of the FaMe TN’s initiative on making the MSMEs of Tamil Nadu Industry 4.0 ready with the aim to build confidence and scale up to Industry 4.0 technologies like IoT systems and meet the OEM’s requirements.

Conclave: Connect, Access, and Collaborate

On 08-12-2022, TANCAM had Industrial Conclave: Connect, Access, and Collaborate. Headed by Krishnamoorthy IAS sir and Sigy Thomas IAS. To get collaborate with all District's Industries centre officials.

Drone Discovery Workshop

The 2-Day Workshop on DRONE DISCOVERY, jointly organized by TANCAM and NOVA AEROSPACE Pvt. Ltd., was successfully conducted on 24 & 25 May 2025 at Thirumayam, Pudukkottai, Tamil Nadu.

NOVA - DRONE WORKSHOP DISCOVERY REGISTRATION

NOVA - DRONE WORKSHOP DISCOVERY REGISTRATION

Technical training program for 75 government school students from across Tamil Nadu

On 10th May 2025, a successful technical training program was conducted in collaboration with Coimbatore Institute of Technology and the Tamil Nadu Advanced Manufacturing Centre of Excellence, benefiting 75 government school students from across Tamil Nadu. 

Excellence Engine Series : Precision Manufacturing

As part of TANCAM’s flagship initiative, the Excellence Engine series aimed at internal quality enhancement, we successfully hosted a workshop on Precision Manufacturing on 2nd May 2025 at 4:30 PM.

Building the Next Generation of Innovators at TANCAM

On 28.04.2025, we had the pleasure of hosting a vibrant group of students from EDII - Chennai at TANCAM!

Empowering Educators: Bridging Classrooms with Cutting-Edge Technology

On 21st April 2025, Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM had the privilege of hosting 30+ passionate faculty members from Dr. Dharmambal Government Polytechnic College for Women, Taramani, for a power-packed one-day workshop at our Centre of Excellence in Chennai.

Technical Fest YUGAM 2025

As part of the Technical Fest YUGAM 2025 at Kumaraguru College of Technology (KCT) on February 4, 2025, TANCAM successfully conducted a one-day workshop on "3D Experience Unleashed: Mastering CATIA." The session provided hands-on training in CATIA on the 3DEXPERIENCE platform, focusing on real-world applications and design best practices. A total of 40 participants, including 24 external and 16 internal attendees, actively engaged in the workshop.
Through this initiative, TANCAM continues to bridge the gap between academia and industry, equipping students with cutting-edge product design and engineering skills to shape the future of advanced manufacturing.

Accelerating Mechanical Product Development: Design to Manufacturing

On 23rd November 2024, the Industry Workshop on "Accelerating Mechanical Product Development: Design to Manufacturing" was successfully held at the COSIEMA Centre of Excellence, Coimbatore, one of TANCAM’s Industry Spoke Centres.

SSN college of engineering Students Industrial Visit to TANCAM

Students from SSN College visited on 18.10.2024 to our Centre of Excellence at Tidel Park, gaining valuable exposure to cutting-edge technologies on the 3DEXPERIENCE platform. 

PERI engineering college Students Industrial Visit to TANCAM

On 08.10.2024, students from PERI College visited our Centre of Excellence at Tidel Park to explore advancements in Design within the field of mechanical and electronics engineering using the 3DEXPERIENCE platform.

Workshop for the Engineering students

Workshop for the students from KIT-Kalaignar Karunanidhi Institute of Technology, Coimbatore.

College of Engineering, Gunidy

Department of Material Science Engineering, Industrial Visit on 05.05.2023

Periyar Maniyammai University

Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) conducted an enlightening knowledge transfer program at Periyar Maniyammai University. This event served as a valuable platform for students and faculty to gain profound insights into advanced manufacturing, fostering innovation and skill development within the academic community.

KCG College of Technology

On May 16, 2022, the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM), conducted a highly informative knowledge transfer program at KCG College of Technology. This event served as a valuable platform for students and faculty alike to gain insights into the latest advancements in advanced manufacturing, fostering a culture of innovation and skill development within the academic community.

ONE DAY WORKSHOP - KUMARAGURU COLLEGE OF TECHNOLOGY

Empowering Future Engineers: TANCAM's 3DExperience Program at CIT, Coimbatore

TANCAM's 3DExperience Orientation Program for CIT on September 02, 2023, was a resounding achievement. This transformative event brought together 300 students from diverse engineering disciplines, imparting crucial 3D modeling and simulation skills. 

Ashok Leyland

We (TANCAM) were happy to welcome a delegation from Ashok Leyland to the Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM powered by Dassault Systèmes. Led by Mr. Ramesh Kumar K HR-Head, Mr. Kalyan Ramasubramanian, Dr. Dr. Arvind A R Deputy General Manager - Project Planning and Mr. Venkatesh Raman their visit marked a milestone in our exploration of collaborations between our organizations on 28.08.2023

Brakes India Private Limited

We were delighted to have Mr. chellapperumal Ganapathy – Vice President (Mfg. Systems Engg. & New Products) – Light Vehicle Business Unit (LVBU) , Mr. P Manian – Vice President (Mfg. Systems Engg.) – Heavy Vehicle Business Unit (HVBU) & Mr. Madhusudhan R – Director (Corporate Affairs & HR), from Brakes India Private Limited visit our Centre of Excellence on Today (28.08.2023). 

Excel College Students Explore TANCAM

On 23rd August 2023, the future of our industry stepped into the world of innovation and advanced manufacturing. Excel College students embarked on an enlightening journey to the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM), leaving behind the confines of textbooks for a day of hands-on learning

"Temple Traditional Architectural Design in 3DEXPERIENCE Platform"

A one-day Workshop on "Temple Traditional Architectural Design in 3DEXPERIENCE Platform" organized by TANCAM and Kural Aram Foundation for Students from the Government College of Architecture and Sculpture. In an effort to bridge heritage and innovation, this workshop offers a unique opportunity for budding architects to delve into the intricacies of traditional temple architecture while harnessing the power of modern technology. 

Vel Tech University Students' Industrial Visit to TANCAM

Om 19.08.2023, A group of bright minds(Students) from Vel Tech University during their recent industrial visit to the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM), powered by Dassault Systèmes. The visit marked an exciting opportunity for these future industry leaders to witness firsthand the cutting-edge technologies and practices shaping the future of manufacturing.

3DExperience Orientation Program

The 3DExperience Orientation Program on 09.08.2023, organized by TANCAM for Stella Maris Engineering College in Nagercoil, was a resounding success, imparting crucial 3D modeling and simulation skills to 300 students from diverse engineering disciplines. 

Drone workshop for Sathyabama University college students conduct by TANCAM

Drone workshop for Sathyabama University college students

The "How to Design a Drone" workshop, conducted by TANCAM at the Center of Excellence (CoE) on June 26, 2023, for Sathyabama University college students, was a resounding success. The event covered a comprehensive agenda, including drone design fundamentals, aerodynamics, materials, hands-on design sessions, and testing.

KCG College of Technology

Entrepreneurship Development and Innovation Institute (EDII)

On 06.06.2023, The field officers from the Entrepreneurship Development and Innovation Institute (EDII) visited the TANCAM. During the visit, the TANCAM team showcased their impressive facilities, highlighted their expertise in upskilling students in the 3DEXPERIENCE Platform, and emphasized the services they provide to industries.

GRT Institute of Engineering and Technology

Department of Mechanical Engineering, Industrial Visit on 6.4.2023.

CODISSIA - COIMBATORE DISTRICT SMALL INDUSTRIES ASSOCIATION

Team visited our TamilNadu Centre of Excellence for Advanced Manufacturing - TANCAM on 3/6/2023. Hearing the capabilities, they have discussed the possibilities through which they can leverage the benefits of the 3DEXPERIENCE platform. During the session, we discussed all the possible applications of the 3DEXPERIENCE platform across the manufacturing domains.

College of Engineering, Gunidy

Department of Printing & Packaging, Industrial Visit on 02.06.2023

College of Engineering, Guindy

College of Engineering, Guindy

Seminar in Sairam Engineering College, Chennai

On 11th May 2023, the TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) team had the honor of giving a presentation at Sairam Engineering College. 

St. Peters Engineering College

St. Peters Engineering College

Indra Institute of Technology

Indra Institute of Technology

Aalim Muhammed Salegh College of Engineering

Impressed with the course curriculum and teaching methods in "NAAN MUDHALVAN", students and staff members from 'Aalim Muhammed Salegh College of Engineering have enrolled for a day-long workshop in Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM on 10 March 2023.

Coimbatore Cluster representatives

visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM and got to know the technological details. During the 4 hours session, the representatives got hands-on experience on the 3DEXPERIENCE platform. Our technical team briefed them about the platform and its capabilities.

Workshop for Domain-based MSME Clusters from Coimbatore District

On 12, January 2023, TANCAM organized a Workshop for a group of Domain-based MSME Clusters from Coimbatore District. During the session, our Team explained the CoE's facilities and the capabilities of the 3dExperience Platform, in a detailed manner

Startup Connect

Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM organized a "Startup Connect" event for Startups on 06.01.2023 (Friday). TANCAM Team showcased the facilities and features of the 3Dexperience platform during the session.

BRD official

On the 3rd of January 2023, a team of BRD officials visited the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) to observe the facilities and assess the center's capabilities. The officials were impressed with the state-of-the-art equipment and infrastructure available at TANCAM, as well as the advanced training programs and research initiatives being carried out by the center. 

Hindustan Chamber of Commerce

A group of Key industrialists and Management People from the Hindustan Chamber of Commerce had visited and explored our TANCAM Facilities on 28th Dec 2022. The session was so interactive, and members were appreciating the core idea of TANCAM and are willing to take part in the initiative in a larger way. 

College of Defence Management, Hyderabad

A Team of Senior Officers of Armed forces who are undergoing Higher Defence Management Course at College of Defence Management, Hyderabad visited TANCAM today (December 13, 2022) to explore CoE's capabilities and how they can use the 3DEXPERIENCE technology.

A one-day Brainstorming Session for 75 Principals from various Anna Universities,

Government Engineering and Polytechnic Colleges on 05.12.2022

A seminar regarding the 3DEXPERIENCE Platform and 3D Designing.

A   seminar   regarding   the    3DEXPERIENCE    Platform    and    3D    Designing Tamil Nadu Centre of Excellence for Advanced Manufacturing conducted a seminar regarding the 3DEXPERIENCE Platform and 3D Designing on December 1, 2022, at 10.30 am.

PERI Institute of Technology

On November 5, 2022, the diligent team from the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) continued their mission of knowledge dissemination by organizing an enlightening knowledge transfer program at PERI Institute of Technology.

EXCEL ENGINEERING COLLEGE

On October 15, 2022, the esteemed team from the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM), in collaboration with Dassault Systèmes, conducted an insightful knowledge transfer program at EXCEL ENGINEERING COLLEGE. 

DMI College of Engineering

On October 12, 2022, the esteemed team from the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) extended its commitment to knowledge dissemination by conducting an insightful knowledge transfer program at DMI College of Engineering in Chitambharam. 

TANCAM SPOKE – SONA COLLEGE OF TECHNOLOGY

TANCAM and Sona College of Technology have established a Hub for students to Upskill on 3DEXPERIENCE platform. The training program intends to provide students with hands-on training about the most recent technologies in the Aerospace, Automotive, and EV domains.

Loyola ICAM College of Engineering & Technology

On May 17, 2022, the dedicated team from the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) conducted an enlightening knowledge transfer program at Loyola ICAM College of Engineering & Technology. 

Agni Engineering College

On April 21, 2022, the dedicated team from the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) continued their mission of knowledge dissemination by hosting a significant knowledge transfer program at Agni Engineering College.

TANCAM at Paris Air Show 2025

TANCAM at Paris Air Show 2025

Positioning Tamil Nadu on the Global Aerospace & Defence Map

Earlier this week, TANCAM had the distinguished opportunity to represent Tamil Nadu at the globally acclaimed Paris Air Show 2025—a cornerstone event in the aerospace and defence sector. As part of the official delegation alongside TIDCO and Guidance Tamil Nadu, TANCAM played a pivotal role in reinforcing the state’s emergence as a global hub for A&D innovation and advanced manufacturing.

TANCAM at ACMEE 2025 – Driving the Future of Manufacturing in Tamil Nadu

TANCAM proudly participated in ACMEE 2025, India’s premier international exhibition on Machine Tools, Automation, and Industrial Technology, held at the Chennai Trade Centre from 19th to 23rd June. With over 10,000+ walk-ins, the event served as a dynamic platform for us to showcase our end-to-end capabilities across Industry, Academia, and Startups.

TANCAM Showcases Advanced Manufacturing Capabilities at India MSME Conclave 2025 – Bengaluru

TANCAM participated in the India MSME Conclave 2025 held on 31st May 2025 in Bengaluru, in association with the Sona Group of Companies.

TANCAM Showcases Advanced Manufacturing Excellence at SUBCON 2025

We,(Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM) were proud to participate in the 9th edition of SUBCON 2025, organized by CODISSIA - COIMBATORE DISTRICT SMALL INDUSTRIES ASSOCIATION from 14th to 16th May 2025 at Coimbatore. With 250+ exhibitors and 2,500+ visitors, the event was a powerful platform for vendor development, industrial collaboration, and innovation exchange.

TANCAM at BVMW Expo, Berlin – Connecting Globally for Local Impact

On April 9, 2024, TANCAM had an opportunity to participate in the BVMW Expo held in Berlin, Germany – an international platform that brought together leaders from Industry, Trade, Investment, and International Recruitment.

This global gathering provided valuable insights, new collaborations, and pathways to foster cross-border partnerships that can support MSMEs, startups, and skill development initiatives for International recruitments

New Era of Aerospace & Defence Manufacturing for AtmaNirbhar Bharat

The Government of Tamil Nadu’s recent announcement for a renewed Aerospace and Defence (A&D) policy with a mission to create the State as a robust, world class Hi-tech Aerospace and Defence destination has gained momentum. One of the key strengths is leveraging the existing strength of 38,000 industries in TN and the highly skilled manpower that is readily available. 

Defence Expo 2022 – Chennai Trade Centre

Defence Expo 2022 – Chennai Trade Centre

Startup Thiruvizha

TANCAM is part of "Tamil Nadu Startup Thiruvizha 2023," hosted by StartupTN - a hub of innovation in our state. The event was a dynamic two-day affair at Coimbatore's CODISSIA Trade Fair Complex on August 19th and 20th. It brought together startup leaders, visionaries, and game-changers, igniting inspiration all around. The event kickstarted with a video address by Chief Minister MK Stalin, setting the tone for the exciting days ahead.

MSME EXPO 2023

Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM had the privilege to participate in the MSME EXPO 2023, organized by COSIEMA on 11 -13 , August 2023 at Padmavathi Ammal Cultural Centre,Coimbatore.

Strategic Electronics Summit 2023

We are delighted to share that the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) had the privilege of showcasing its remarkable capabilities at the esteemed Strategic Electronics Summit 2023, held on the 17th and 18th of July, at the prestigious Hotel Hilton, Embassy Manyata Business Park in Bengaluru.

India EV Show 2023

TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) recently made waves at the India EV Show held on 26th, 27th, and 28th May 2023. Showcasing their remarkable facilities and highlighting the upskilling features of the 3DEXPERIENCE Platform

Indian Air Force Indigenisation Summit 2023

Indian Air Force Indigenisation Summit 2023 was organised by Tamil Nadu Industrial Development Corporation (TIDCO) in association with Aerospace Industry Development Association of Tamil Nadu (AIDAT) on 16th May 2023, at TIDEL park, Chennai.

TN SKILLS 2023

TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) made a significant impact at TN SKILLS 2023, held on 5th May. Showcasing their exceptional facilities and highlighting the upskilling features of the 3DEXPERIENCE Platform, TANCAM's stall became a hub of innovation and excitement for participants and industry professionals.

G20's Startup 20X - SU.X.SS conclave

TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) recently created a buzz at the highly anticipated SUXSS event organized by AIC Raise Incubator for Startups on 28 April 2023. The event provided an ideal platform for TANCAM to showcase its state-of-the-art facilities, upskilling features, and engineering services powered by the renowned 3DEXPERIENCE Platform. This participation underlined Tamil Nadu's commitment to nurturing startups and promoting advanced manufacturing in the region.

Umagine Chennai

We (Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM) are proud to have participated in the Umagine Chennai , which was organized by the Tamil Nadu Government from March 23 to 25, 2023 at Chennai Trade Centre. 

MSME CONNECT

Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM presented our key abilities and facilities in the MSME CONNECT event organized by FaMe TN on 03 ,04 Mar 2023. About 500 MSMEs were present in the venue. Dr. Ravi Shankar explained the importance of digital manufacturing and the extent to which our 3DEXPERIENCE can support the MSMEs in designing and simulating their products.

Source India Electronics Supply Chain Expo

TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) recently made waves at the prestigious Source India Electronics Supply Chain Expo held on 13th February 2023. Showcasing their cutting-edge facilities and upskilling features, TANCAM's stall was a centre of attention for participants and industry professionals alike.

Aero India 2023

TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) recently made a significant impact at the prestigious Aero India 2023, held from 13th to 17th February. Showcasing their state- of-the-art facilities and highlighting the upskilling features of the 3DEXPERIENCE platform, TANCAM's stall at the Tamil Nadu pavilion drew attention from aviation enthusiasts, industry professionals, and key stakeholders.

G20 Educational Summit, Chennai

On January 31, 2023, to February 2, 2023, TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) showcased the upskilling features of the 3DEXPERIENCE Platform through a stall. The 3DEXPERIENCE Platform is a software solution developed by Dassault Systèmes that offers a range of tools and capabilities for design, engineering, manufacturing, and collaboration.

Defence Expo 2022 in Gandhinagar

TANCAM (Tamil Nadu Centre of Excellence for Advanced Manufacturing) recently made a significant impact at the prestigious Defence Expo 2022 in GujaratOctober 18 to 22, 2022, where we showcased our state-of-the-art facilities and the upskilling features of the renowned 3DEXPERIENCE Platform. This event served as a platform to highlight Tamil Nadu's commitment to advanced manufacturing and its role in the defence industry.

Assam Delegation Visits Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM

Assam Delegation Visits TANCAM to Explore Advanced Manufacturing & Skill Development

We were honored to host a high-level delegation from Assam at the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM).

TANCAM team provided an overview of all verticals of TANCAM, highlighting its role in advanced manufacturing, Industry 4.0, Digital Twin technologies, startup incubation, and skilling initiatives. The delegation also witnessed the impact created by TANCAM across Tamil Nadu in empowering students, startups, MSMEs, and industries.

Strengthening Global Pathways: Dr. Kathrin Misera-Lang's Visit to TANCAM

We (Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM) were privileged to host Dr. Kathrin Misera-Lang, Consul General (interim), German Consulate, for an engaging dialogue on advancing international collaborations in higher education and global career opportunities.

UAE Delegates and Minister Visit TANCAM

We were happy to host Ms. Maram Masoud from the Ministry of Economy, along with 20 distinguished delegates from the UAE, at our Centre of Excellence (CoE) TANCAM, Today (23.072024). This visit provided an excellent platform to showcase our state-of-the-art facilities and demonstrate how TANCAM is driving growth and innovation in Tamil Nadu.

Consulate General of the Federal Republic of Germany

Michaela Küchler , Consul General, Consulate General of the Federal Republic of Germany, has visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM facility, here in Tidel park today.

Dr. Sivarajah Ramanathan,Mission Director & CEO

Dr. Sivarajah Ramanathan,Mission Director & CEO Tamil Nadu Startup and Innovation Mission

Thiru. Sivarajah Ramanathan, Mission Director & CEO – Startup TN

Thiru. Sivarajah Ramanathan, Mission Director & CEO – Startup TN

Dr. D. Karthikeyan IAS., Principal Secretary to Government Higher Education Department

Dr. D. Karthikeyan IAS., Principal Secretary to Government Higher Education Department & Tmt. G.Laxmi Priya, I.A.S., Director of Technical Education & Chairman, Board of Examinations visited on 25.11.2023

DRDO

On 25.08.2023 We(TANCAM) were honored to welcome Shri M Z Siddique, Director General (AERO)

United Arab Emirates (UAE)

On July 4, 2023, a distinguished delegation from the United Arab Emirates (UAE) visited to the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) facility, situated within Tidel Park. 

Australian High Commission

On the 7th of June 2023, Commodore Damien, Head of Australian Defence Staff at the Australian High Commission, visited the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) facility, situated in Tidel Park. Accompanying him was Ms. Grace Fuller, First Secretary Defence. During their visit, they engaged in in-depth discussions regarding the technological capabilities of TANCAM and received comprehensive briefings on the ongoing projects underway at the facility.

Enterprise Singapore

On the 11th of May 2023, Mrs. Sabrina Ho and Mrs. Rakshanda Raisa, members from Enterprise Singapore, paid a visit to the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) facility located at Tidel Park.

British Deputy High Commission

We (Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM) were delighted to have Delegates from British Deputy High Commission, visit our Centre of Excellence,(30.03.2023). It was an honor to have the opportunity to showcase our facilities and share our insights with such a distinguished group.

UK Delegations Meetup

On March 30, 2023, a delegation from the United Kingdom had the opportunity to meet with Tamil Nadu startups at the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM). The UK delegation engaged in productive discussions with the innovative startups based at TANCAM, exploring potential avenues for collaboration, knowledge sharing, and investment opportunities. 

Defence Research and Development Organization (DRDO)

Defence Research and Development Organization (DRDO)

JAPAN CONSULATE

Senior Officials from JETRO - Japan External Trade Organization have visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM facilities on 02,March, 2023. Our team has explained the facilities in detail and the services offered. Officials were appreciating the efforts and explained the importance of empowering MSMEs.

US CONSULATE

On Tuesday, February 21, US Consulate Officials visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM facility to learn more about its mission and working model for leveraging technology.

US CONSULATE

US CONSULATE

On Tuesday, February 21, US Consulate Officials visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM facility to learn more about its mission and working model for leveraging technology

Dr. Selvakumar IAS., Chairman, Karnataka Skill Development Authority

Dr. Selvakumar IAS., Chairman, Karnataka Skill Development Authority, Principal Secretary to Government, Skill Development, Entrepreneurship and Livelihood Government of Karnataka visited on 09.12.22

Tmt J. Innocent Divya IAS. - Managing Director

Tmt J. Innocent Divya IAS. - Managing Director

Tamil Nadu Skill Development Corporation visited on 21.11.2022

Mr. V.Arun Roy IAS - Secretary

Mr. V.Arun Roy IAS - Secretary,

Micro, Small & Medium Enterprises Department visited on 16.11.2022

Thiru S.Krishnan,IAS, Tmt Jayashree Muralidharan IAS and Tmt Vandana Garg IAS

Thiru S.Krishnan,IAS, Tmt Jayashree Muralidharan IAS and Tmt Vandana Garg IAS Visited 23.06.2022.

Faculty Development Program - Coimbatore

Faculty Development Program - Coimbatore

Virtual Internship for Best Outcoming Students from Tier-3 Cities & Socially Weak Students

Tamil Nadu Centre of Excellence for Advanced Manufacturing are delighted to have participated as the training partner in the esteemed Nan Mudhalvan Program. It has been an honour for us to contribute to this program and play a significant role in shaping the careers of aspiring Engineering students.

Indira Institute of Engineering and Technology

Indira Institute of Engineering and Technology, - Department of Mechanical Engineering, at Integral Coach Factory (ICF), Perambur, On 20 April 2023

GRT Institute of Engineering and Technology

GRT Institute of Engineering and Technology, - Department of Mechanical Engineering, at TANCAM Tidel Park, Chennai.

Rajalakshmi Institute of Technology, - Department of Mechanical Engineering, - at TVS Hosur

Rajalakshmi Institute of Technology, - Department of Mechanical Engineering, - at TVS Hosur

DMI College of Engineering, - Department of Mechanical Engineering, at Mayuran industries, Kanchipuram

DMI College of Engineering, - Department of Mechanical Engineering, at Mayuran industries, Kanchipuram

Loyola Institute of Technology, - Department of Mechanical Engineering, at SR Foundries.

Loyola Institute of Technology, - Department of Mechanical Engineering, at SR Foundries.

Kathir College Of Engineering – Coimbatore, at SIDCO Private Industrial Estate, Kurichi, Coimbatore

Kathir College Of Engineering – Coimbatore, at SIDCO Private Industrial Estate, Kurichi, Coimbatore

CSI College Of Engineering, - Department of Mechanical Engineering, at Ponni Sugars Ltd, Erode.

CSI College Of Engineering, - Department of Mechanical Engineering, at Ponni Sugars Ltd, Erode.

Kgisl institute of Technology – Coimbatore

Kgisl institute of Technology – Coimbatore, - Department of Mechanical Engineering, at Masco Tea Industries, Kerala.

College of Engineering, Gunidy. - Department of Printing & Packaging, at TANCAM Tidel Park, Chennai

College of Engineering, Gunidy. - Department of Printing & Packaging, at TANCAM Tidel Park, Chennai

College of Engineering, Gunidy. - Department of Material Science Engineering, at TANCAM Tidel Park, Chennai

College of Engineering, Gunidy. - Department of Material Science Engineering, at TANCAM Tidel Park, Chennai

INDUSTRIAL VISIT

As a component of the NAAN MUDHALVAN training program, students enrolled in the "Product Design and Manufacturing 3D Surface Modelling" course had the opportunity to participate in industrial visits. These visits were organized by the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM) to complement the theoretical training with real-world exposure to industries.

PRODUCT DESIGN AND MANUFACTURING 3D SURFACE MODELLING

Followed by the Faculty Development Program, TANCAM trainers played a vital role in imparting practical knowledge to students enrolled in the "Product Design and Manufacturing 3D Surface Modelling" course. On NAAN MUDHALVAN Day, TANCAM trainers visited each college and conducted training sessions using the 3DEXPERIENCE Platform by Dassault Systèmes. 

FACULTY DEVELOPMENT PROGRAM - CHENNAI & COIMBATORE

The Faculty Development Program on "Product Design and Manufacturing- 3D Surface Modelling" was conducted at the Madras Institute of Technology, Chennai. In Coimbatore, The Faculty Development Program was conducted at the PSG Institute of Technology and Applied Research, Coimbatore. 

Naan Mudhalvan Training Program

Tamil Nadu Skill Development (TNSDC) has initiated a program "NAAN MUDHALVAN," aimed at empowering the youth through training and upskilling. One of the key training partners for this program is the Tamil Nadu Centre of Excellence for Advanced Manufacturing (TANCAM). TANCAM's involvement has been instrumental in providing training to both college faculties and students.

Anand Institute of Higher Technology,Chennai on 04.07.2022

Anand Institute of Higher Technology,Chennai on 04.07.2022

Mr. Frederic Besson, World Wide Vice President, CATIA Global Sales visited our CoE

We (Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM) are honored to welcome Mr. Frederic Besson, World Wide Vice President, CATIA Global Sales, to our TANCAM Centre of Excellence, October 9, 2024!

CSIR-CSIO Officials Visit to TANCAM

Delegates Visit from University of East London

Delegates Visit from University of East London on 05.06.2024

Dr K R Balakrishnan - MGM Healthcare Visited TANCAM

Dr K R Balakrishnan - MGM Healthcare Visited TANCAM

Vanitha Venugopal, CEO of Tamil Nadu Technology Hub (iTNT)

CVRDE-DRDO TEAM

We were happy to host esteemed members of the CVRDE-DRDO team at the Center of Excellence (TANCAM) on May 29, 2024.

SSN iFOUND Team Visit

Boniface Pascalraj and Dheepan Jeyaraman from SSN iFOUND, visited Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM and met with Vijayadeepan S M, COO. The discussions focused on exploring mutual synergies and potential collaboration opportunities.

iStart Team's Strategic Visit to Tamil Nadu!

iStart Team's Strategic Visit to TANCAM!

Hinduja Tech Officials

Hinduja Tech Officials

Senior Manager from Garden Reach Shipbuilders & Engineers Limited

Senior Manager from Garden Reach Shipbuilders & Engineers Limited

Members from SIMA Association

Members from SIMA Association

Servall Industry persons visited Tancam and explored the facilities

Servall Industry persons visited Tancam and explored the facilities

Naan Mudhalvan Team

Naan Mudhalvan Team

Senior Manager from iTnT Visited on 24.05.2023.

Senior Manager from iTnT Visited on 24.05.2023.

Faculties from Sairam Engineering College Visited Centre of Excellence on 15.05.2023.

Faculties from Sairam Engineering College Visited Centre of Excellence on 15.05.2023.

Mr. Vasantharaj C, Director- Kumaraguru Centre for Industrial Research and Innovation Visited our CoE TANCAM on 25.03.2023.

Mr. Vasantharaj C, Director- Kumaraguru Centre for Industrial Research and Innovation Visited our CoE TANCAM on 25.03.2023.

Mr. Bharat V,Chief Operating Officer - Yalamanchili Visited our CoE TANCAM on 07.03.2023.

Mr. Bharat V,Chief Operating Officer - Yalamanchili Visited our CoE TANCAM on 07.03.2023.

Technical experts from ePLANE co. Visited our CoE TANCAM on 07.03.2023

Technical experts from ePLANE co. Visited our CoE TANCAM on 07.03.2023

The Management team from Crescent Innovation and Incubation Council (CIIC) Visited our CoE TANCAM on 02.03.2023

The Management team from Crescent Innovation and Incubation Council (CIIC) Visited our CoE TANCAM on 02.03.2023.

Faculties of Saveetha Engineering College Visited our CoE TANCAM on 21.02.2023.

Faculties of Saveetha Engineering College Visited our CoE TANCAM on 21.02.2023.

Senior Management team from National Hub for Healthcare Instrumentation Development (NHHID) Visited our CoE TANCAM on 03.02.2023

Senior Management team from National Hub for Healthcare Instrumentation Development (NHHID) Visited our CoE TANCAM on 03.02.2023

Senior Management team from National Institute of Electronics & Information Technology (NIELIT) Visited our CoE TANCAM on 02.02.2023

Senior Management team from National Institute of Electronics & Information Technology (NIELIT) Visited our CoE TANCAM on 02.02.2023

Mr. Anandasankar, MD - AMIGOO Aerospace Visited our CoE TANCAM on 27.01.2023

Mr. Anandasankar, MD - AMIGOO Aerospace Visited our CoE TANCAM on 27.01.2023

Col Manik Anand, Aerospace Division, Department of Defence Production Govt of India Visited our CoE TANCAM 25.01.2023

Col Manik Anand, Aerospace Division, Department of Defence Production Govt of India Visited our CoE TANCAM 25.01.2023

Mr.Manoharan & Mr.senthilkumar From Newsprint and papers Limited Visited our CoE TANCAM on 20.12.2022

Mr.Manoharan & Mr.senthilkumar From Newsprint and papers Limited Visited our CoE TANCAM on 20.12.2022

SRM Group Dr.K. Kathiravan, Deputy Director, and Dr.T. Jothi Basu, Dean Visited our CoE TANCAM on 21.12.2022.

SRM Group Dr.K. Kathiravan, Deputy Director, and Dr.T. Jothi Basu, Dean Visited our CoE TANCAM on 21.12.2022.

Karunya Institute of Technology and Science Visited our CoE TANCAM on 20.12.2022.

Karunya Institute of Technology and Science Visited our CoE TANCAM on 20.12.2022.

Dr T Sasilatha - Dean Academic, Dr S Priya - HOD (EEE) .Dr Madhesh - Professor (Mechanical) from AMET University Visited our CoE TANCAM on 19.12.2022

Dr T Sasilatha - Dean Academic, Dr S Priya - HOD (EEE) .Dr Madhesh - Professor (Mechanical) from AMET University Visited our CoE TANCAM on 19.12.2022.

HODs from VEL TECH Engineering Visited our CoE TANCAM on 1.12.2022

HODs from VEL TECH Engineering Visited our CoE TANCAM on 1.12.2022

HODs from Anand Institute of Higher Technology Visited our CoE TANCAM on 1.12.2022.

HODs from Anand Institute of Higher Technology Visited our CoE TANCAM on 1.12.2022.

Hindustan Institute of Technology Management Team Visited our CoE TANCAM on 01.12.2022

Hindustan Institute of Technology Management Team Visited our CoE TANCAM on 01.12.2022

Govt college of Fine Arts College Visited our CoE TANCAM on 01.12.2022.

Govt college of Fine Arts College Visited our CoE TANCAM on 01.12.2022.

Automotive Component Manufacturers Association of India - Management Team Visited our CoE TANCAM on 30.11.2022

Automotive Component Manufacturers Association of India - Management Team Visited our CoE TANCAM on 30.11.2022

FORGE – Mr. Aravind Visited our CoE TANCAM on 29.11.2022

FORGE – Mr. Aravind Visited our CoE TANCAM on 29.11.2022

Management Team from Aatral Visited our CoE TANCAM on 25.11.2022

Management Team from Aatral Visited our CoE TANCAM on 25.11.2022

Mr.Dhuru Goyal - FAMETN Visited our CoE TANCAM on 14.11.2022

Mr.Dhuru Goyal - FAMETN Visited our CoE TANCAM on 14.11.2022

SONA College HODs Visited our CoE TANCAM on 02.08.2022

SONA College HODs Visited our CoE TANCAM on 02.08.2022

Dr. Pathalamuthu & Students from Anand Institute of Higher Technology Visited our CoE TANCAM on 25.07.2022.

Dr. Pathalamuthu & Students from Anand Institute of Higher Technology Visited our CoE TANCAM on 25.07.2022.

WOMEN HACKATHON - Mahendra Engineering College - Namakkal

WOMEN HACKATHON - Sona College of Technology-Salem.

WOMEN HACKATHON - Rajalakshmi Engineering College - Mevalurkuppam

WOMEN HACKATHON - KIT KalaignarKarunanidhi Institute Of Technology - Coimbatore

Faculty Development Program - Kumaraguru College Of Technology

TANCAM Expands with Two New Spoke Centres in Hosur

The Hon’ble Chief Minister of Tamil Nadu inaugurated two new TANCAM Spoke Centres at Hosur 0n 11, Sep 2025, expanding the reach of the Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM.

New Spoke CoE at SA Engineering College

We are delighted to share that TANCAM has signed an MoU with SA Engineering College, Chennai, to establish a new Spoke Centre of Excellence on 04.09.2025.

TANCAM Signed MoU with CSIR-CSIO

We are happy to announce that Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM has signed a Memorandum of Understanding (MoU) with @CSIR-CSIO.

TNWISE 2025 - Rajalakshmi Engineering College, Chennai

The 6th Edition of the TNWISE 2025 (Tamil Nadu Women in Science and Engineering) Hackathon, hosted by Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM, was successfully conducted at Rajalakshmi Engineering College, Chennai on 11.04.2024

TNWISE 2025 - Er. Perumal Manimekalai College of Engineering, Hosur

The Fifth Edition of TNWISE 2025 (Tamil Nadu Women in Science and Engineering) Hackathon, hosted by Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM, took place on April 4, 2025, at Er. Perumal Manimekalai College of Engineering, Hosur. 

TNWISE 2025 - Kumaraguru College of Technology (KCT), Coimbatore

The Fourth edition of TNWISE 2025 (Tamil Nadu Women in Science and Engineering) Hackathon, hosted by TANCAM, took place on March 28, 2025, at Kumaraguru College of Technology (KCT), Coimbatore. With 380+ teams, 1000+ participants, and 380+ projects from 120+ institutions, the event provided an incredible platform for women in STEM to drive innovation in smart mobility and sustainability. This year’s theme, Transportation and Mobility, focused on developing smart transportation solutions, urban mobility enhancements, and sustainable innovations to address critical challenges in the sector.

TNWISE 2025 - Periyar Maniammai Institute of Science & Technology, Thanjavur

Tamil Nadu Centre of Excellence for Advanced Manufacturing - TANCAM’s the Third edition of TNWISE 2025 (Tamil Nadu Women in Science and Engineering) Hackathon, an exclusive event for women in STEM, was held on March 21, 2025, at Thanjavur, Periyar Maniammai Institute of Science & Technology.

TNWISE 2025 - Sona College of Technology, Salem

TNWISE 2025: Empowering Women Innovators for Smart Urban Development

TNWISE 2025 - KIT-Kalaignarkarunanidhi Institute of Technology

TNWISE 2025: Women exclusive Hackathon creating Researchers, innovators, and entrepreneurs to develop indigenous products!

Empowering the Next Generation of Skilled Talent

On 06.05.2025, TANCAM successfully organized a Campus Interview Drive at Government ITI, Nagapattinam, aimed at connecting skilled youth with employment opportunities in the manufacturing and allied industries. The event witnessed the participation of 300 students, out of which 165 were shortlisted by participating companies, marking a significant milestone in our continuous effort to bridge the gap between industry requirements and vocational talent.